Early Estimation of Seismic Hazard for Strong Earthquakes in Taiwan   总被引：1，自引：0，他引：1  

Wen-Yu Jean  Yu-Wen Chang  Kuo-Liang Wen  Chin-Hsiung Loh 《Natural Hazards》2006,37(1-2):39-53

A shakemap system providing rapid estimates of strong ground shaking could be useful for emergency response providers in a damaging earthquake. A hybrid procedure, which combines site-dependent ground motion prediction models and the limited observations of the Real-Time Digital stream output system (RTD system operated by Central Weather Bureau, CWB), was set up to provide a high-resolution shakemap in a near-real-time manner after damaging earthquakes in Taiwan. One of the main factors that affect the result of ground motion prediction analysis is the existence of site effects. The purpose of this paper is to investigate the local site effects and their influence in the ground shaking and then establish an early estimation procedure of potential hazard for damaging earthquakes. Based on the attenuation law, the site effects of each TSMIP station are discussed in terms of a bias function that is site and intensity-level dependent function. The standard deviation of the site-dependent ground motion prediction model can be significantly reduced. The nonlinear behavior of ground soil is automatically taken into account in the intensity-level dependent bias function. Both the PGA and the spectral acceleration are studied in this study. Based on the RTD data, event correctors are calculated and applied to precisely estimate the shakemap of damaging earthquakes for emergency response.  相似文献   

青藏高原中部的东西向扩张构造运动   总被引：3，自引：0，他引：3  

徐纪人赵志新  石川有三 《岩石矿物学杂志》2005,24(5):447-452

系统分析了1933~2003年间青藏高原及其周缘发生的745个中、强地震的震源机制解,研究了高原地壳构造运动及其动力学特征。结果表明,大量正断层型地震集中发生在青藏高原中部海拔4000m以上的地区,其中许多地震是纯正断层型地震。震源机制结果显示,该区正断层型地震的断层走向多为南北方向,断层位错矢量的水平分量均位于近东西方向,这表明青藏高原高海拔地区存在着近东西方向的扩张构造运动。地震震源应力场的研究结果表明,在高原中部高海拔地区,E-W向或WNW-ESE向的水平扩张作用控制着该区的地壳应力场。青藏高原高海拔地区近东西方向的扩张构造运动是该区引张应力场的作用结果,其动力学原因可能与持续隆升的高原自重增大引起的重力崩塌及其周边区域构造应力状况有关。而青藏高原周缘地区,除了东部边缘外,南部的喜马拉雅山前沿以及青藏高原的北部、西部边缘所发生的绝大部分地震都是逆断层型或走滑逆断层型地震。在青藏高原周缘地区,北东或者北北东方向水平挤压的构造应力场为优势应力场。在中国西部的大范围内,主压应力P轴水平分量位于NE-SW方向,形成了一个广域的NE-SW方向的挤压应力场。青藏高原及其周缘应力场特征表明,印度板块的北上运动以及它与欧亚板块之间的碰撞所形成的挤压应力场是高原强烈隆起的直接原因。在青藏高原中南部形成了近东西向引张应力场为主的区域,并以东西向扩张构造运动部分释放其应力积累。研究高原高海拔地区的引张应力场和近东西向扩张构造运动的特征,对于认识青藏高原强烈隆起的地球动力学过程与机制,有着重要的理论意义。  相似文献   

CCSD在线流体监测捕获的气体地球化学异常与2004年9．3级苏门答腊地震可能的超远程关系   总被引：5，自引：0，他引：5  

曾令森许志琴  罗立强詹秀春梁凤华  杨经绥李海兵 《岩石学报》2005,21(2):521-524

中国大陆科学钻探工程在线流体地球化学监测在2004年12月10至2005年1月10日之间捕获到一段重要的气体地球化学异常。该异常从2004年12月24日晚上11点半开始到12月29日晚上7点半结束,其中在12月26日早上7点半到29日晚7点半这段异常非常特殊,表现出流体地球化学的剧烈变化。具体表现为流体组分从基本上不含Ar、He及N2跳跃到富含Ar、但亏损He和N2。该异常发生在2004年9.3级苏门答腊地震前1个半小时。由于CCSD现场离苏门答腊地震震中距离大于4170公里,大于该地震破裂长度1200公理的3倍,该地震在CCSD现场产生的静态应力变化微乎其微,不足以导致CCSD现场深部岩石或封闭破裂的岩石物理性质剧烈变化,因而可以排除静态激发效应的作用。在我国的云南和广东等地所观测到的地震异常和地下水位变化等表明2004年苏门答腊地震的动态激发效应主要沿东北方向,这和大地震的动态激发具有方向性一致。而CCSD现场就位于该方向上。我们推测2004年苏门答腊地震所产生的面波在CCSD现场激发的动态效应,导致库仑型失稳,增进深部岩石或破裂带的渗透率,释放富含Ar但亏损He和N2的流体,产生CCSD所观测到的气体异常。  相似文献   

地震作用下的灰坝液化特征及其动力稳定性分析--以安阳电厂为例   总被引：1，自引：0，他引：1  

李永乐  陈宇  彭成山  刘宪亮 《地质科技情报》2002,21(1):83-86

根据安阳电厂灰坝岩土工程性质及其动力学特性,建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析.在此基础上,在不同工况条件下对灰坝进行了抗液化安全评价及抗震稳定性分析.研究表明,在不设碎石桩、无排渗体条件下,粉煤灰子坝的抗液化安全系数Ks＜1.25,将发生液化;在设碎石桩、有排渗体条件下,粉煤灰子坝的抗液化安全系数明显提高,Ks≥1.25,不会发生液化.抗震稳定性分析表明,在上述两种工况条件下灰坝是稳定的.  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study of a semi‐active stiffness damper under various earthquake inputs     

S. L. Djajakesukma  B. Samali  H. Nguyen 《地震工程与结构动力学》2002,31(10):1757-1776

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions     

M. C. Griffith  A. Kawano  R. F. Warner 《地震工程与结构动力学》2002,31(10):1879-1888

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Ground‐shaking mapping for a scenario earthquake considering effects of geological conditions: a case study for the 1995 Hyogo‐ken Nanbu,Japan earthquake     

Kazuo Fujimoto  Saburoh Midorikawa 《地震工程与结构动力学》2002,31(12):2103-2120

In order to examine the applicability of ground‐shaking mapping techniques to a near‐field earthquake, a peak ground velocity map of the 1995 Hyogo‐ken Nanbu, Japan earthquake computed from seismic zoning methods that consider the effects of geological conditions is compared with the actual observed intensity map. When computing the ground‐shaking map, the site amplification at each site is calculated in terms of the average shear‐wave velocity of the ground estimated from the corresponding geomorphological conditions. This map shows a relatively good agreement with the observed intensity map. However, the computations provide smaller values for certain disastrous areas of the earthquake, where the effects on ground motion of a deep, irregular underground structure have been reported. The effect of such structures on site response is examined implementing 2D FEM analyses, thereby being also incorporated into the method. Results considering the effect of the irregular underground structure show better agreement with the observed intensity map. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

张北地震区三维构造特征   总被引：7，自引：0，他引：7  

赖晓玲  李松林  张先康  刁桂苓 《地学前缘》2002,9(4):383-388

地震层析成像结果揭示了张北地震区的构造特征。震源区周围分布有相交的北北西和北东向低速异常带。极震区正下方壳内存在高速异常的坚固体 ,其周围被多条低速异常带围限。区域构造具备了大量积累应变能和向高应力区传递应变能的孕震构造特征 ,北北西和北东向的隐伏断裂共同构成了区域的发震构造。该震区在中新生代以来有过多期岩浆活动 ,震中区周围分布有几个新第三纪的火山口。极震区米家沟附近火山的三维剖分图给出了该火山从地表到壳内 10km深度的速度图像 ,中新生代的火山岩浆活动对该区域孕震构造的形成起了重要作用。  相似文献   

The Mount Parnitha (Athens) Earthquake of September 7, 1999: A Disaster Management Perspective     

Pomonis  Antonios 《Natural Hazards》2002,27(1-2):171-199

Natural Hazards - Strong earthquakes in the proximity of densely inhabited urban areas pose one ofthe most complicated disaster management situations faced by societies today. Herethe experience...  相似文献